欢迎访问济南丰印纸制品有限公司网站!

联系我们
热线电话:
0531-86011567
联系人:鞠经理
手机:13465900292
邮箱: 50062082@qq.com
网址:http://www.xinfengyinshua.cn/
地址:山东省济南市明湖广场1-810

济南手提袋印刷应该需要注意的哪些问题?

来源:http://www.xinfengyinshua.cn/   发布时间:2020-08-03
印刷是一项必须注意细节的工作,手提袋印刷也是一样,如果不注意细节,很多时候就会出现问题,会让我们损失惨重。小编就给您介绍一下济南手提袋印刷应该注意哪些问题?
Printing is a job that must pay attention to details, so is bag printing. If we don't pay attention to details, there will be problems, which will make us lose a lot. Xiaobian would like to introduce to you what problems should be paid attention to in the enterprise handbag printing.
1、油墨使用注意,在手提袋印刷过程中,一定要注意同种油墨,一些时候人们将不同性质的油墨混合,但是两者却无法相容,终影响了手提袋的印刷质量,这就得不偿失了。
1. Pay attention to the use of ink. In the process of bag printing, we must pay attention to the same kind of ink. Sometimes people mix different kinds of ink, but the two are not compatible, which ultimately affects the printing quality of the bag, which is not worth the loss.
2、注意油墨的保护,油墨性质不是很稳定,很容易出现问题,所以在进行印刷的时候一定要注意保护。首先要做到避免阳光直射,其次是温度要适中,不要低于10摄氏度,也不要高于26摄氏度。
2. Pay attention to the protection of ink, ink properties are not very stable, it is easy to have problems, so when printing, you must pay attention to protection. First of all, we should avoid direct sunlight. Secondly, the temperature should be moderate. It should not be lower than 10 ℃ or higher than 26 ℃.
手提袋印刷工艺:亮膜、哑膜、烫金、烫银、击凸、局部上光、袋底挡板、其它特殊工艺等
Hand bag printing process: bright film, dumb film, stamping, silver stamping, bumping, local glazing, bag bottom baffle, other special processes
手提袋印刷主要有以下几种纸张:
The following kinds of paper are mainly used for bag printing:
白卡纸:230克 ,250克,300克,350克
White cardboard: 230g, 250g, 300g, 350g
山东印刷厂
Shandong printing factory
铜版纸:180克,200克,250克,300克
Coated paper: 180g, 200g, 250g, 300g
白板纸:250克,300克,350克
Whiteboard: 250 g, 300 g, 350 g
白牛皮纸:180克,200克,260克
Kraft paper: 180 g, 200 g, 260 G
3、干稀度问题,油墨如果不经常搅拌很容易出现粘结现象,山东印刷厂小编告诉您而油墨如果太稀对于印刷也会有很大的影响,所以这两点一定要注意。
3. Dry thinness problem, if the ink is not often stirred, it is easy to stick, Shandong printing factory small editor told you, and if the ink is too thin for printing will also have a great impact, so we must pay attention to these two points.
4、水在印刷中非常重要,因为它能控制水墨粘度,还可以平衡PH值。一旦我们发现PH值没有控制好,一定要注意使用水来进行调节。
4. Water is very important in printing because it can control the ink viscosity and balance the pH value. Once we find that the pH value is not well controlled, we must pay attention to the use of water to adjust.
5、干燥问题,因为现代印刷都是机器的大规模印刷,所以速度是非常快的,这就会在一定程度上影响油墨的干燥。一定要保证油墨的干燥速度,因为干燥的过慢,就会出现花版面的问题。
5. Drying problem, because modern printing is a large-scale printing machine, so the speed is very fast, which will affect the drying of ink to a certain extent. Be sure to ensure the drying speed of the ink, because the drying is too slow, there will be a flower layout problem.
济南印刷厂讲解的内容  更多的内容  请咨询公司官网http://www.xinfengyinshua.cn/