我们购物的时候，手里提的多的东西就是手提袋了。那你对手提袋是否有充分的认识，它在印刷时需要注意什么呢？下面济南手提袋厂家为您讲解一番：

When we shop, we carry a lot of things in our hands. Do you have a full understanding of the handbag? What should you pay attention to when printing it? Next, Jinan handbag manufacturer will explain to you:

材料及尺寸的选择

Selection of materials and dimensions

在设计的时候其实就要先确定好需要什么材质的手提袋，印刷厂要注意客户选择的手提袋材质、尺寸、颜色等，然后根据其特点进行针对性的印刷。如材质方面是否需要覆膜，哪种印刷方式可以避免色差，怎么印刷可以将纸张充分利用等等？

In fact, when designing, we should first determine the material of the handbag. The printing factory should pay attention to the material, size and color of the handbag selected by the customer, and then carry out targeted printing according to its characteristics. For example, do you need film covering in terms of material, which printing method can avoid color difference, and how can you make full use of paper in printing?

油墨水的使用

Use of oil ink

既然是印刷，肯定就会使用到油墨，油墨的使用也是十分有技巧的。假如两种不能相互融合的油墨混合到一起，对印刷的质量就会有很大的影响。另外，即使可以相互融合的油墨也需搅拌彻底，如果出现稀稠程度不一的油墨，一样会影响手提袋印刷的质量。

Since it is printing, ink will certainly be used, and the use of ink is also very skillful. If two kinds of inks that cannot be fused with each other are mixed together, it will have a great impact on the quality of printing. In addition, even the inks that can be fused with each other need to be stirred thoroughly. If the inks with different thickness appear, the quality of the handbag printing will also be affected.

纸张PH值

Paper PH

印刷过程中合适的纸张PH值一般为中性，或者略带碱性。这能让水分充分挥发作用，加快干燥时间。测量纸张的酸碱度可用pH值试纸测定，也可用雷磁pH计测定。

The appropriate paper PH value in the printing process is generally neutral or slightly alkaline. This can make the water fully volatilize and speed up the drying time. The acidity and alkalinity of the paper can be measured by pH test paper, and also by the magnetic pH meter.

干燥时间

drying time

由于印刷是一瞬间就完成的动作，时间非常短暂，故对油墨水的干燥速度有特别的要求。如果干的很慢的话就会把前面所有的操作都白费了；假如油墨过多，在印刷完成后，要迅速对多余的油墨进行清洗，干了的话就很难清洗。用清水难以洗掉的话可以加入一点清洗剂。有时候也会为看避免油墨太多，在印刷油墨中也会加入一点干燥剂。

Because printing is an action completed in a flash and the time is very short, there are special requirements for the drying speed of oil ink. If you work very slowly, all the previous operations will be wasted; If there is too much ink, it is necessary to clean the excess ink quickly after printing. If it is dry, it is difficult to clean it. If it is difficult to wash off with water, you can add a little detergent. Sometimes, in order to avoid too much ink, a little desiccant will also be added to the printing ink.

后续加工工序

Subsequent processing procedures

手提袋除了主体的袋子印刷以外，还有可能设计手提袋手提绳子的加工和覆膜工艺等，这戏印刷工艺都是手提袋印刷后序的工序，一定要非常细致，即使繁琐，也不能马虎，否则非常容易造成材质的浪费。

In addition to the bag printing of the main body of the handbag, it is also possible to design the processing and film covering process of the portable rope of the handbag. This printing process is the post-process of the handbag printing. It must be very careful. Even if it is tedious, it should not be careless, otherwise it is very easy to cause material waste.

一个合格的手提袋除了好看，更要好用。在颜值上，赏心悦目，将品牌的形象很好地展现出来。在使用上，有提手方便用户携带，也方便用户二次利用。承重能力要合适，切口部位要光滑圆润不割手。更多相关内容就来我们网站http://www.xinfengyinshua.cn咨询！

A qualified handbag is better to use than good-looking. In terms of face value, it is pleasing to the eyes and shows the brand image well. In use, the handle is convenient for users to carry, and also convenient for users to reuse. The load-bearing capacity should be appropriate, and the cut part should be smooth and round without cutting hands. Come to our website for more relevant content http://www.xinfengyinshua.cn consulting service