对于消费者来说，手提袋基本的功能要牢固耐用。但是对于商家或者印刷厂来说，在手提袋印刷的时候会遇到各种问题。今天济南手提袋制作厂家就跟大家说说遇到这些问题时，我们应该如何解决！

For consumers, the basic function of handbag should be firm and durable. But for businesses or printing plants, they will encounter various problems when printing handbags. Today, Jinan handbag manufacturer will tell you how to solve these problems!

手提袋印刷因为水墨为纯水性系统，不要将水墨与醇性墨和溶剂型油墨混合运用或在墨中加入有机溶剂，避免导致印刷质量问题。

For handbag printing, since ink is a pure water-based system, do not mix ink with alcohol ink and solvent based ink or add organic solvent to the ink to avoid printing quality problems.

水墨宜存在室内，室温在5℃—50℃摄氏度。

Ink should be stored indoors at 5 ℃ - 50 ℃.

运用时，应用搅拌棒将水墨在桶中搅匀，丈量其粘度后倒人墨槽。粘度若过高或过低，可以加稀释剂或增稠剂进行调理。

When using, stir the ink in the bucket with a stirring rod, measure its viscosity and pour it into the ink tank. If the viscosity is too high or too low, add thinner or thickener for conditioning.

印刷过程中因为水的蒸发效果，会导致水墨粘度升高和PH值下降，PH值应控制在8.5—9.5之间，若超出此范围，可用PH安稳剂进行调理，保持粘度和PH值的安稳。

Due to the evaporation effect of water during printing, the viscosity of ink will increase and the PH value will decrease. The PH value should be controlled between 8.5 and 9.5. If it exceeds this range, it can be conditioned with PH stabilizer to maintain the stability of viscosity and PH value.

一般情况下，水墨适于手提袋印刷高速印刷，低速印刷时若遇到枯燥速度太快或印刷效果欠佳的情况，可增加必定比例的慢干剂。

Generally, ink wash is suitable for high speed printing of handbag printing. If the drying speed is too fast or the printing effect is poor during low speed printing, a certain proportion of slow drying agent can be added.

印刷结束后应将剩下水墨搜集回相应的原装桶中或将墨槽的盖子盖严，以备下次运用，谨防因为水的蒸发导致水墨表面结膜变稠乃至变干。

After printing, the remaining ink should be collected back into the corresponding original barrel or the cover of the ink tank should be tightly covered for the next use, to avoid the thickening or even drying of the conjunctiva on the ink surface due to the evaporation of water.

水墨的印刷适性受印刷条件承印物的表面特性环境温湿度；水墨存放时间长短等客观条件的影响，因此在使用水墨时，需要用一些助剂对水墨做细微调整以获得佳印刷效果。

The printability of ink is affected by the surface characteristics of the substrate, ambient temperature and humidity; Due to the influence of objective conditions such as the storage time of ink, when using ink, it is necessary to use some additives to make minor adjustments to the ink in order to obtain a good printing effect.

此外手提袋印刷后残留在印刷设置上的墨在其未完全枯燥前可用清水冲刷，无法用清水洗净的墨可用清洗剂进行清洗。关注我们http://www.xinfengyinshua.cn，了解更多相关事项！

In addition, the ink left on the printing setup after the handbag is printed can be washed with clean water before it is completely dry, and the ink that cannot be washed with clean water can be washed with detergent. Follow us http://www.xinfengyinshua.cn , learn more about it!