济南印刷包装的时候需要注意哪些方面的问题呢？墨盒方面的检查是要做的，下面小编来为您讲述下。

What problems should we pay attention to when printing and packaging in Jinan? The inspection of the ink cartridge needs to be done. Here is a short compilation to tell you about it.

有的时候由于操作者可能粗心大意，某一个墨盒里面都已经没有了还在继续开着设备操作，这个时候印刷出来的图案可能有一些地方颜色就显示不出来，这样只能够印刷出来报废品，导致纸张和材料大量的浪费掉。

Sometimes, because the operator may be careless, there is no ink cartridge inside and the equipment is still running. At this time, the printed pattern may have some local colors that cannot be displayed, so that only the waste products can be printed, resulting in a large amount of waste of paper and materials.

没开机之前一定要检查一下墨盒里面是否还有足够的油墨，如果墨盒已经没有了，油墨就需要重新更换墨盒。

Before starting the machine, be sure to check whether there is enough ink in the ink cartridge. If the ink cartridge is gone, replace the ink cartridge.

初次印刷之前应该先进行一次试印刷，只印刷出一个产品并且检查印刷出来的样品是否存在质量方面的问题，比如文字或者图案是否足够的清晰，对比用户提供的样稿看一看有没有哪些地方不符合的。

Before the initial printing, a trial printing should be carried out. Only one product should be printed and the printed samples should be checked for quality problems, such as whether the words or patterns are clear enough. Compare the samples provided by users to see if there are any discrepancies.

在检查的时候应该在光线充足的地方进行，这样才能够进行仔细的对比分析。通过这些检查操作发现初次印刷出来的产品是属于完全符合要求的，这样才可以继续接下来的印刷作业。

The inspection should be carried out in a well lit place so that careful comparative analysis can be carried out. Through these inspection operations, it is found that the products printed for the first time are in full compliance with the requirements, so that the next printing operation can continue.

在这种操作的时候要注意不要总是用一些习惯性的方式来进行操作，有可能对某一个包装进行印刷时间已经比较长了，有可能就形成了一种固定的操作手法，换了另外一种包装如果同样采取相同的操作手法，就很有可能导致印刷出来的东西出现问题，还有可能因为采用相同的操作手法导致出现工作当中的事故。

In this operation, we should pay attention not to always use some habitual methods. It is possible that a certain package has been printed for a long time, which may form a fixed operation method. If another package adopts the same operation method, it may cause problems in the printed things, It is also possible that accidents may occur in the process of work due to the same operation methods.

尤其像那种工作岗位比较单调的印刷工人在进行作业更换的时候，一定要首先看一看印刷的包装产品是否已经更换了，如果产品型号已经发生了改变，那么就要在右手操作的时候更换以前的习惯性的操作。

In particular, when printing workers with monotonous jobs change jobs, they must first check whether the printed packaging products have been changed. If the product model has changed, they must change the previous habitual operations when operating with their right hands.

另外还需要注意在整个操作的过程当中，应该每隔一段时间就停机检查一下相关的设备运行的情况，还要检查一下纸张是否足够，如果发现纸张足够并且设备一切运行正常，那么就可以继续开机进行印刷作业。更多相关内容就来我们网站http://www.xinfengyinshua.cn咨询！

In addition, it should be noted that during the whole operation process, the machine should be shut down every other time to check the operation of the relevant equipment, and also check whether the paper is enough. If the paper is enough and the equipment is running normally, the machine can continue to be started for printing. More relevant content will come to our website http://www.xinfengyinshua.cn consulting service