随着如今人们的审美观念不断的提升，手提袋的外观也越来越受到人们的重视，人们也普遍愿意使用外观精美的手提袋包装印刷品。那么济南手提袋包装印刷需要注意什么呢？下面小编就为大家简单的介绍一下这个问题。

With the continuous improvement of people's aesthetic concept, people pay more and more attention to the appearance of handbags, and people are generally willing to use beautiful handbags to pack printed products. So what should be paid attention to in Jinan handbag packaging and printing? The following is a brief introduction to this issue.

手提袋包装印刷品的干燥问题是比较重要的，如果干燥不好，就有可能造成图文的不清晰、模糊，影响其观赏性。影响手提袋包装印刷的因素有很多，在干燥的时候要仔细的考虑温度、湿度等问题，以避免此种情况的发生。

The drying problem of handbag packaging printed matter is quite important. If the drying is not good, it may cause unclear and fuzzy graphics and affect its viewing. There are many factors affecting the packaging and printing of handbags. When drying, the temperature and humidity should be carefully considered to avoid such a situation.

手提袋包装印刷纸张的选择方面，有些纸张是很厚的，有些则是比较的薄，太厚的不能进行多次折页，太薄的又很容易损坏。因此在选择纸张的时候，要根据印刷的需求进行具体的考虑。

As for the selection of printing paper for handbag packaging, some paper is very thick, while others are relatively thin. If the paper is too thick, it cannot be folded many times, and if it is too thin, it is easy to damage. Therefore, when selecting paper, specific considerations should be made according to the needs of printing.

另外在油墨方面，要注意油墨印刷的厚度和面积，如果在印刷的过程油墨的印刷面积过厚或者过大，手提袋包装印刷品就可能出现气泡的现象。这点是非常重要的，因为如果起泡了会直接的影响手提袋包装印刷的效果和质量，对于企业的形象是不利的。

In addition, in terms of ink, attention should be paid to the thickness and area of ink printing. If the printing area of ink is too thick or too large in the printing process, there may be bubbles in the printed matter packed in the handbag. This is very important because blistering will directly affect the effect and quality of handbag packaging and printing, and is unfavorable to the image of the enterprise.

因为手提袋印刷产品类属于水墨水性体系，所以不要将溶剂型印刷油墨与水墨混合在一起使用，以免在印刷手提袋产品的时候出现手提袋印刷产品质量问题。水墨比较适合储存在室内，室温好保持在5度到50度。

Because the handbag printing products belong to the water-based ink system, do not mix the solvent type printing ink with the water-based ink to avoid the quality problems of the handbag printing products when printing the handbag products. Ink is suitable for indoor storage, and the room temperature is good at 5 to 50 degrees.

在使用的时候，应该把水墨用搅拌棒搅拌均匀，在测量完它的粘度之后在倒进印刷机械的墨槽。若粘度过低或者是过高的话，可以适当的添加一些增稠剂或者是稀释剂调节。

When using, the ink should be stirred evenly with a stirring bar and poured into the ink tank of the printing machine after measuring its viscosity. If the viscosity is too low or too high, it can be adjusted by adding some thickener or diluent.

印刷完之后应该把剩下的水墨收集起来，然后在将水墨装到原装桶内将盖子盖紧，以便下次在进行使用，于在印刷之后残留在印刷装置上的水墨在完全没有干燥的时候可以使用清水冲洗。

After printing, the remaining ink should be collected, and then the cover should be tightly closed after the ink is loaded into the original barrel so that it can be used next time. The ink remaining on the printing device after printing can be washed with water when it is completely dry.

以上便是小编为大家简单介绍的手提袋包装印刷注意事项，希望对于大家能够有所帮助。大家如果想要了解更多相关的信息，请持续的关注我们网站http://www.xinfengyinshua.cn。

The above are the precautions for the packaging and printing of handbags briefly introduced by the Xiaobian. I hope it can be helpful to you. If you want to know more relevant information, please continue to follow our website http://www.xinfengyinshua.cn 。